Sharp PN-LC862 User Manual

9
E
Hardware Must have a USB 2.0 compliant port.
Operating system
Windows 10, Windows 11
macOS v11, v12, v13
Google Chrome OS Version 104 or later
To use the touch panel with an HDMI / D-sub / DisplayPort connection, connect the supplied USB cable to the computer.
The touch panel and touch pen operate with the standard driver of each operating system. On the Mac, operation is only
possible in mouse mode.
The Information Display Downloader can also be downloaded from the following website.
https://www.sharp.eu/download-centre
When the Information Display Downloader is installed, you can check and download the most recent versions of the software
programs.
To install the software, see the manual for each.
Pen Software setup program and Touch Viewing Software setup program can be downloaded using Information Display
Downloader.
Supplied Components
If any component should be missing, please contact your dealer.

LCD Monitor: 1

Remote control unit: 1

Cable clamp: 3

Power cord

Remote control unit battery: 2

Setup Manual: 1

Touch pen: 2

Camera mount: 1

Camera mount screw (M3x6): 1

Camera screw (inch thread): 1

Tray: 1

Tray mounting screws (M3x8): 4

USB cable: 1

Wireless adapter: 1

Cover SHARP logo: 1
Place this sticker onto the SHARP logo to cover the logo.
* Please note: do not dispose of batteries in household waste for environmental protection. Follow the disposal instructions for
your area.
System Requirements

Sharp PN-LC862 Specifications

General

Brand	Sharp
Model	PN-LC862
Category	Monitor
Language	English