>>
<<
On-Screen Display Menu
Example
Initial Setup (Continue)
Input Settings
Color System
Select the video signal system compatible with your
equipment from the list below:
AUTO/NTSC/PAL-M/PAL-N
NOTE
"Color System" can only be set for the VIDEO IN.
HDMI CEC Link
Make the settings to use LINK Operation.
Set the settings with "Initial Setup" > "Input Settings" > "HDMI
CEC Link".
(See page 6-2.)
Fine Sync.
You can adjust the position on the image input from a PC the
settings with "Initial Setup" > "Input Settings" > "Fine Sync.".
(See page 7-1.)
Reset
If complex adjustments are made and the settings cannot be
restored to normal, you can reset the settings to the factory
preset values.
ENG 4-7
To Next Page
Loading...
