Sharp PN-Q901

>>
<<
Appendix
Setting the Monitor on the Wall (Continue)
Wall Mount Kit Specifications
Standard dimensions for wall mount kits are shown below.
The illustration is based on the PN-Q601 model as an example.
PN-Q901 PN-Q801 PN-Q701 PN-Q601
VESA screw
hole specs (A-B)
23 5/8(600)-15 3/4(400) 15 3/4(400) - 15 3/4(400)
Width
a1 1 37/64(40) 2 3/8(60)
a2 13 25/64(340) 10 1/4(260)
Height
b1 7 7/8(200) 8 9/32(210) 8 43/64(220)
b2 14 49/64(375) 11 47/64(298) 10 29/32(277) 10 33/64(267)
b3 6 57/64(175) 4 7/32(107) 3 7/16(87)
c1 3 5/32(80) 3 13/64(81) 1 15/16(49) 1 31/32(50)
ENG 9-4
Unit: inch
(mm)
a1: Maximum distance from the mounting hole
a2: Maximum distance from the Monitor's center
b1: Distance between the Monitor's center and the mounting hole
b2: Maximum distance from the Monitor's center
b3: Maximum distance from the mounting hole
c1: Minimum gap