EasyManuals Logo

Sharp PN-R903A Setup Manual

Sharp PN-R903A
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
ENGLISH
7
E
Turning Power On/Off
Caution
Turn on the monitor rst before turning on the PC or
playback device.
When switching the main power switch, the power switch or
the POWER button off and back on, always wait for at least
5 seconds. A short interval may result in a malfunction.
Turning on the main power
Main power switch
Caution
The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
For a complete electrical disconnection, pull out the main
plug.
Turning power on/off
Press the POWER button or POWER switch to turn the power
ON/OFF.
Power LEDPower switch
Status Status of the monitor
Green lit Power on
Orange lit Power off (Standby mode)
Green ashing Input signal waiting mode
n
Date/time setting
If the time has yet to be set when the monitor is rst turned
on, the date/time setting screen appears. Set the date and
time.
DATE/TIME SETTING
//
OK···[ENTER] CANCEL···[RETURN]
: :
01 01 17
/
12 AM00
:/ 20
1. Press or to select the date and time, and
press
or to change the numerical values.
2. Press
ENTER
.
Be sure to set the date and time.
The date/time setting screen will close automatically if
no operation is performed for about 15 seconds. The
date and time can be set using DATE/TIME SETTING
from the SETUP menu when the date/time setting screen
disappears.
TIPS
Set the date in “Month/Day/Year” order.
Set the time on a 12-hour basis.
The clock is maintained by the internal battery.
If you already set the time but the date/time setting
screen appears when the power is turned on, the
internal battery may be exhausted. Please contact an
authorized SHARP servicing dealer or service center for
assistance with battery replacement.
Estimated service life of the internal battery: About 5
years (depending on monitor operation)
The initial battery was inserted at the factory when the
monitor was shipped, so it may run out of power before
its expected operation life.

Other manuals for Sharp PN-R903A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp PN-R903A and is the answer not in the manual?

Sharp PN-R903A Specifications

General IconGeneral
BrandSharp
ModelPN-R903A
CategoryMonitor
LanguageEnglish

Related product manuals