Sharp PN-Y556 - Power Cord and Cable Management; Power Cord Connection and Cable Binding

14
E
Connecting the Power Cord
Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
Main power switch
1
AC input terminal
Power cord
(Supplied)
For power outlet
2
3
Binding Cables
Cable clamp
(affixing type)
Affixing point
Cable
The supplied cable clamps (afxing type) can be used to clamp the power cord and cables connected to the back of the monitor.
Caution
• Attach the supplied cable clamps to a at surface. Do not attach over a vent.
• Remove any dust or dirt before attaching.