Sharp PN-Y556 - Setting the USB Flash Drive Cover; Attaching the SD Memory Card Cover

15
E
Setting the USB ash drive cover
1. Insert the USB ash drive into the USB port.
USB portPower supply
terminal
2. Attach the USB ash drive cover and secure with the
provided screw.
Screw
TIPS
• If the USB ash drive will be attached, use a USB ash drive with dimensions no greater than 1-15/16 inch (50 mm) (L) ×
13/16 inch (20 mm) (W) × 1/2 inch (12 mm) (H).
Attaching the SD memory card cover
1. Insert the SD memory card into the SD card slot.
SD card slot
2. Attach the SD memory card cover and secure with the
provided screw.
Screw