Sharp QT-CD180

Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read
this manual carefully. It will guide you in operating your SHARP
product.
PORTABLE CD STEREO SYSTEM
MODEL
QT-CD180
NOTE
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency en-
ergy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
WARNING
FCC Regulations state that any unauthorized changes or modifications
to this equipment not expressly approved by the manufacturer could
void the user’s authority to operate this equipment.
NOTES
● It is the intent of Sharp that this product be used in full compliance
with the copyright laws of the United States and that prior permis-
sion be obtained from copyright owners whenever necessary.
● The letters in brackets contained in the model number indicate the
color of the product only. Operation and specifications are unaffected.
FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss or theft, please record
below the model number and serial number which are located on the bottom of the
unit.
Please retain this information.
Model number .................................................................................
Serial number .................................................................................
Date of purchase .................................................................................
Place of purchase .................................................................................
OPERATION MANUAL
Quick Guide / Guía rápida ............. Pages 10-11 / Página 10-11

Sharp QT-CD180 Specifications

General

Brand	Sharp
Model	QT-CD180
Category	Stereo System
Language	English

Summary

Product Introduction and Regulatory Notices

FCC Compliance and User Records

Details FCC regulations for the device and instructions for user record keeping.

Safety Warnings and Precautions

Electrical Safety and Symbol Explanations

Warnings about electric shock risks, explanations of safety symbols, and general cautions.

Operational and Laser Safety

Precautions for environmental conditions, voltage, and laser pickup safety during operation.

Important Safeguards and Usage

General Safety Instructions

Comprehensive safety rules for installation, operation, water/heat exposure, and power sources.

Specific Usage and Servicing Precautions

Guidance on antenna grounding, non-use periods, object entry, and when to seek qualified service.

Controls, Accessories, and Power

Unit Controls and Indicators

Identification of all buttons, switches, and indicators on the unit for user interaction.

Accessory and AC Power Operation

Information on the included AC power cord and how to operate the system using AC power.

Power Sources and Radio Operation

Battery Power Management

Instructions for installing, replacing, and caring for batteries used in the unit.

Tuning and Listening to Radio

Steps for selecting FM/AM, tuning stations, adjusting volume, and antenna positioning.

Compact Disc Playback

Basic CD Playback Steps

Instructions for playing CDs, including loading, starting, interrupting, and stopping playback.

CD Navigation and Precautions

How to skip tracks, fast forward/reverse, and important precautions for CD playback.

Cassette Tape Operation and Media Care

Cassette Playback and Controls

Steps for playing cassette tapes, including basic operations, interruptions, and stopping.

Tape and CD Handling Guidelines

Recommendations for cassette tape preparation and proper care for compact discs.

Recording and Erasing Features

Recording from CD and Radio

Detailed instructions for recording audio from a CD or radio onto a cassette tape.

Cassette Recording Prep and Tape Erasing

Pre-recording tests, tape preparation, and steps to erase recorded cassette tapes.

Maintenance and Technical Specifications

Unit Cleaning and Condensation

Procedures for cleaning internal components, cabinet, and managing condensation issues.

Component and Performance Specs

Technical details on CD player, radio, and tape recorder specifications and performance metrics.

Quick Start Guide: Setup and CD Play

Initial Setup and Battery Use

Steps for powering the unit via AC or batteries and preparing it for operation.

CD Playback Procedure

Concise guide on how to select CD function and play a disc.

Quick Guide: Tape, Radio, and Recording

Tape and Radio Listening

Simplified steps for playing cassette tapes and tuning into radio broadcasts.

Recording from CD

Quick instructions for recording audio from a CD onto a cassette tape.

Warranty and Energy Information

Consumer Limited Warranty Details

Information on the product warranty, coverage, and how to obtain service.

ENERGY STAR Program Benefits

Explanation of ENERGY STAR® benefits for energy savings and environmental protection.