Sharp QT-UH5H - General Control

E-6
ENGLISH
8
QT-UH5H
Basic Operation
General control
 To turn the power on
Turn the power switch to ON position, this will bring the set to stand-
by mode.
Press the ON/STAND-BY button to turn the power on.
 Volume control
 Equaliser
When the EQUALIZER button is pressed, the current mode setting
will be displayed. To change to a different mode, press the
EQUALIZER button repeatedly until the desired sound mode ap-
pears.
 Extra Bass (X-BASS)
Press the X-BASS button to emphasise bass sound.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
At STAND-BY mode, red led will lights up.
Press the VOLUME (+ or –) button to
increase or decrease the volume.
MAXIMUM300
.....
FLAT (Not displayed) No equalisation.
ROCK For rock music.
CLASSIC For classical music.
POPS For pop music.
JAZZ For jazz.