Sharp QW-GT45F444W-DE - Page 27

EN-27
CHAPTER -6: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
Settings Menu
In order to enter the Settings Menu, hold the option and delay buttons for 3 seconds. The display will show
(“Keep Pressing ..X”) to let you know for how many more seconds you have to hold the button. When this
number reaches zero, you will see the Menu settings on the display. You may navigate within the menu by using
the selection buttons. In order to exit the menu, you may hold the option and delay buttons for 3 seconds as you
did when entering the menu or you may select the seventh row in the menu with the conrmation button.
The menu content is as follows:
1. Language
2. Water Hardness
3. Volume 4. Brightness
5. Ecomode
6. Factory Settings
7. Energy save
8. Exit Menu
1- Language settings
After you enter the menu settings, use the up/down selection buttons to select the language. You will see the
following display: (1. Language: X) in which “X” is the current language. After that, press the conrmation button
to activate the language selection and after selecting the new language, save it by pressing the conrmation but-
ton again.
Available languages that you can select :
2- Water hardness setting
You may nd this in the section where the water softening setting is explained.( page 15 )
3- Volume level
You may adjust the level of your machine’s audible alarms here. After entering the menu,select the “3- Volume ” by
using the selection buttons. Here you will see “Volume:X” (X:L1,L2,L3 ). L1 is the lowest, L3 is the highest volume
level. After pressing the conrmation button, activate “X”, select the desired noise level and save the selection by
pressing the conrmation button once more.
4- Brightness level
You may adjust the level of your machine’s display brightness here After entering the menu, select the “4- Bright-
ness” by using the selection buttons. Here you will see “brightness :X” (X:L1,L2,L3 ). L1 is the lowest, L3 is the
highest brightness level. Select the desired brightness level and save the selection by pressing the After pressing
the conrmation button, activate “X” and conrmation button once more.
5- Eco mode
This mode saves energy by minimizing the display brightness level after 30 seconds of non-operation. After enter-
ing the menu, select the “5- Eco mode” by using the selection buttons. Here you will see “Ecomode: X” (X: YES or
NO ). After pressing the conrmation button, activate “X”; you might use your machine with the Eco mode on or off.
6- Factory Settings
In order to discard all the settings you made and restore the factory settings, select the “6- Factory settings” by
using the selection buttons. Here you will see “6. Factory settings: X” (X: yes or no). After pressing the conrma-
tion button, activate “ X ”; you might save your selection by selecting “Yes“ or “No” expression and pressing the
conrmation button again. When you restore the factory settings, the machine will return to the following settings:
1- Language : English
2- Water hardness setting : L3
3- Volume : L2
4- Brightness : L2
5 -Eco Mode : No
7 -Energy Save : Yes
7 - Energy Save:
The energy save option activates door opening system at the end of the programme. The auto door opening
system provides the required drying performance at low rinsing temperatures and reduces energy consumption.
English
Turkish
French
Deutsch
Italian
Greek
Croatian
Russian
Finnish
Norwegian
Dutch
Swedish
Danish
Spanish
Portuguese
Polish
Czech
Slovenian
Hungarian