EN-29
CHAPTER -6: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
When above warning is seen;
1- Make sure that the water is not cut
2- Make sure that the hydrant is open
3- If both are true, call a qualied technician. Whenever an error which you cannot x occurs, the above warning
will be displayed. When you see it, call a qualied technician.
When your machine gives the above warnings, the error codes are specied after the denition. You may nd
related information in the “FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE” section in your user
guide.
Call Service
To Next Page
Loading...
