Sharp R-15AT Original Instruction

7
NO.
Step
Procedure Display
1
Press the SET key twice within 2 sec-
onds.
Example: If you want to set 4 minutes on 60% for the 1st sequence and 2 minutes on 30% for the 2nd sequence
for 1 serving in memory 1.
Key Order
To programme time and power level into a memory
X 2
2
4
5
6
7
8
9
10
11
Enter desired cooking time for the 1st
sequence. (4 minutes)
Press the SELECT POWER key.
Enter desired power level for the 1st
sequence. (60%)
Press the SELECT TIME key.
Enter desired cooking time for the 2nd
sequence. (2 minutes)
Press the SELECT POWER key.
3
Note: 1. If the cooking time is over the max. time, the display will show "EE9". See page 14.
2. If your programmed time is over max. time at Double Quantity, you cannot use Double
Quantity for the memory. You can cook only 1 serving.
3. It is not necessary to press the SELECT POWER key
for 100%.
4. At step 1 the audible signal will only sound on the second press of the SET key
.
Press the NUMBER key
.
NO.
NO. will flash on and off.
P = Power
X 2
Press the SELECT TIME key.
Enter desired power level for the 2nd
sequence. (30%)
Press the SET key twice to complete
the setting.
SEEG R15AT O/M(E),P04-13 13.7.9, 8:56 AM7

Sharp R-15AT Specifications

General

Grill	No
Rotisserie	-
Control type	Buttons
Display type	LCD
Product type	Solo microwave
Certification	CE
Product color	Stainless steel
Microwave power	1000 W
Built-in display	Yes
Appliance placement	Countertop
Number of power levels	11
Current	16 A
Connected load	- W
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	424 mm
Width	520 mm
Height	309 mm
Weight	18000 g
Interior dimensions (W x D x H)	351 x 372 x 211 mm