Sharp R-15AT - Adjusting Double Quantity Time Constant

8
NO. X2
NO.
To change the time constant for double quantity
The time constant for double quantity is preset 1.7 times the single quantity cooking time, but you can alter this
constant to suit your needs.
Example: If you want to change the time constant to 1.67 in memory 1.
X 2
Step
Procedure
1
Key Order Display
2
3
X 2
5
6
Press the SET key twice to complete
the setting.
Set the time constant (1.67).
4
Note: 1. In case you want to change the time constant it must be set for each key separately.
2. The time constant can be set from 0.00 to 9.99.
3. At step 1 the audible signal will only sound on the second press of the SET key
.
NO. will flash on and off.
NO. X2
X2
X2
Press the SELECT TIME key.
Press the NUMBER key
.
Press the DOUBLE QUANTITY key.
Press the SET key twice within 2 sec-
onds.
SEEG R15AT O/M(E),P04-13 13.7.9, 8:56 AM8