EasyManua.ls Logo

Sharp R-23AT - Specifications

Sharp R-23AT
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB-21
SPECIFICATIONS
AC Line Voltage 230V, 50Hz, single phase
Distribution line fuse/circuit breaker 16A (time lag)
AC Power Required R-23AT: 2.9 kW
R-25AT: 3.15 kW
Output Power R-23AT: 1800W (IEC 60705)
R-25AT: 2100W (IEC 60705)
Microwave Frequency 2450MHz *(Group 2/Class B)
Sound level less than 70dB (A)
Outside Dimensions 510 mm(W) x 335 mm(H) x 470 mm(D) (Single oven)
510 mm(W) x 670 mm(H) x 470 mm(D) (Two ovens)
Cavity Dimensions 330 mm(W) x 180 mm(H) x 330 mm(D)
Oven Capacity 20 litres
Cooking Uniformity Rotary antenna system
Weight Approx. 33 kg
* This Product ful ls the requirement of the European standard EN55011. In conformity with this standard,
this product is classi ed as group 2 class B equipment. Group 2 means that the equipment intentionally
generates radio-frequency energy in the form of electromagnetic radiation for heating treatment of food.
Class B equipment means that the equipment suitable to be used in domestic establishments.
(This product is designed for commercial application only and as such it falls outside the scope of Regu-
lation (EC) 1275/2008 implementing EU Directive 2005/32/EC on eco-design requirements for standby
and off mode electric power consumption. Sharp do not recommend the product for domestic application
and will not accept any liability for such use.)
R23AT_OM_NORDIC_5_EN_SE_NO_FI_DK21 21R23AT_OM_NORDIC_5_EN_SE_NO_FI_DK21 21 2013-12-02 11:15:122013-12-02 11:15:12

Other manuals for Sharp R-23AT

Related product manuals