8
SETTING THE CLOCK
MICROWAVE COOKING
This is a 12 hour clock. To set the clock
Example: 10 minute cooking time at 50% power.
Enter the Cook Time
Start Cooking
Select the Power Level
Press the NUMBER PAD to input cooking time.
Press START/+30 SEC to start cooking.
Press POWER once, “PL10” will display, indicating 100% Power Level.
There are 11 power levels to choose from - 100%, 90%, 80%, 70%, 60%, 50%, 40%, 30%, 20%, 10%, 0%.
Refer to the table below on how to select the right power level.
The cook time can be programmed for up to 99 minutes 99 seconds
(
99:99
)
.
Press POWER continuously until the required power level is displayed.
1. Press CLOCK once. “00:00” will display and the hour figure will flash.
1. Press the NUMBER PAD of 1, 0, 0, 0 in order; “10:00” will display.
Note:
• During the setting of the clock, if STOP/CANCEL is pressed or there is no operation for 1 minute, the
setting will be unsuccessful.
Microwave Power Level Guide
Level 10 9 8 7 6 5 4 3 2 1 0
Power 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
Display PL10 PL9 PL8 PL7 PL6 PL5 PL4 PL3 PL2 PL1 PL0
2. Press POWER once, “PL10” will display. Press POWER continuously until “PL5” displayed.
3. Press START/+30 SEC to start cooking, the time will count.
2. Press NUMBER PAD to input the time,
(
Time range should be 1:00-12:59
)
.
3. Press CLOCK to confirm the setting.
Notes:
• To stop the microwave before the end of the cook time, press STOP/CANCEL.
• If the door is opened during cooking/defrosting to stir or turn the food, the cook time on the display stops
automatically. The time will start to count down again once the door is closed and START/+30 SEC is
pressed.
R-28A0(B).indd 8R-28A0(B).indd 8 2023/02/07 10:46:232023/02/07 10:46:23
To Next Page
Loading...
