7
STOP BUTTON
SETTING THE CLOCK
ENGLISH
Example:
To set the 24 hour clock to 23:35
Choose the 24 hour
clock.
1. Choose the clock
function.
(12 hour clock)
2. Set the hours. Rotate the
TIMER/WEIGHT/
PORTION knob
clockwise until the correct
hour is displayed (23).
Check the display.
4. Set the minutes (35).
5. Press the MICROWAVE
POWER LEVEL button to
start the clock.
NOTE:
1. You can rotate the TIMER/WEIGHT/PORTION
knob clockwise or counter-clockwise.
2. Press the STOP button if you make a mistake
during programming.
3. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
show after the power is reinstated. If
this occurs during cooking, the programme will be
erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
There are two setting modes: 12 hour clock and 24 hour
clock.
1.
To set the 12 hour clock, hold the MICROWAVE
POWER
LEVEL button down for 3 seconds.
will appear in the display.
2. To set the 24 hour clock, press the MICROWAVE
POWER LEVEL button once more after Step 1, in the
example below will appear in the display.
x1 for 3 secs.
To set the clock, follow the example below.
3. Press the
MICROWAVE
POWER LEVEL
button to change
from hours to
minutes.
x1 for 3 secs.
x1
x1
x1
Use of the STOP button:
1. Erasing a mistake during programming.
2. Stopping the oven temporaily during cooking.
3. Cancelling a programme during cooking by
pressing the STOP button twice.
To Next Page
Loading...
Need help?
General
