8
BEFORE OPERATING
Getting Started
Clock Setting
Step Procedure Pad Order Display
1
Plug the oven into a power point and
switch on the power.
Ensure the oven door is closed.
* To enter the present time of day 11:34
(
AM or PM
)
.
Step Procedure Pad Order Display
1
Press the CLOCK/SET TIMER pad
once.
× 1
2
Enter the correct time of day by pressing
the numbers in sequence.
3
Press the START/+30SEC. pad.
This is a 12 hour clock. If you attempt to enter an incorrect clock time
(
e.g. 13:45
)
, the clock would not be
active.
Press the STOP/CLEAR pad and re-enter the time of day
(
e.g. 1:45
)
.
R-45SV(ST).indb 10R-45SV(ST).indb 10 2023/05/30 12:31:042023/05/30 12:31:04
To Next Page
Loading...
