Sharp R45SVST - Operation of Touch Control Panel; Control Panel Display; Touch Control Panel Layout

7
OPERATION OF TOUCH CONTROL PANEL
The operation of the oven is controlled by pressing the appropriate pads arranged on the surface of the
control panel.
An entry signal tone should be heard each time you press the control panel to make a correct entry.
In addition an audible signal will sound for 5 times when cooking procedure is required.
Control Panel Display
Touch Control Panel Layout
Indicators
SMART SENSOR COOK
PADS
Press to select Sensor
Cook menus.
MEAT DEFROST PAD
Press to select
the Meat Defrost menu.
POULTRY/FISH DEFROST
PAD
Press to select the Poultry/
Fish Defrost menu.
NUMBER PADS
Press to enter cooking time,
clock time and weight of
food.
POWER
LEVEL PAD
Press to select microwave
power
setting.
If not pressed, HIGH is
automatically
selected.
Press to alter the cooking
result for automatic
operations.
STOP/CLEAR
PAD
Press to clear during
programming.
Press once to stop operation
of oven during cooking;
press twice to cancel cooking
programme.
CLOCK/SET TIMER PAD
Press to select clock or
timer.
START/+30SEC. PAD
Press to start oven after
setting programmes.
Press once to cook for 30
seconds at HIGH or increase
by 30 seconds multiples by
pressing numerous times
during cooking.
CONVENIENCE PADS
Press to select
Convenience menus.
R-45SV(ST).indb 9R-45SV(ST).indb 9 2023/05/30 12:31:002023/05/30 12:31:00