Sharp Roku TV LC-32LB601C - Connecting a Cable or Satellite Box; HDMI Connection for Cable;Satellite Box

17
LC-32LB601U/LC-32LB601C/LC-40LB601U
32" HD LED 720p/40" Full HD LED 1080p Sharp Roku TV
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see What connection should I use? on page 16.
You can connect your cable or satellite box using:
• HDMI® (best)
• AV (good)
• Coaxial (good)
HDMI
®
(best)
1 Make sure that your TV’s power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI® cable (not provided) to an HDMI jack on your TV and to the HDMI OUT jack on the cable or satellite
box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 On the Home screen, press or to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
Note
For better picture quality, we recommend that you use cables designated as
High Speed HDMI® cables.
Note
An HDMI® cable carries both audio and video. You do not need to use any
audio cables.
HDMI® cable
Cable or
satellite box
Side of TV
HDMI® cable
connector
HDMI® jack
On your TV
Cable
wall jack
40" TV shown