Sharp RZ-E601 - MSR+ Ibutton and MSR (for JP) Installation Guide

16
MSR+ iButton (model name : RZ-E1MT1) and MSR (for JP)(model name :
RZ-E1MR2) installation guide (on POS Right side)
1. Connecting POS and MSR( slim)+ iButton cable (2 bundles)
(be careful the cable colours that are connected should be matching )
2. Connecting POS and MSR(JP) cable (1 bundle)
(be careful the cable colours that are connected should be matching )
Insert cable into POS hole