[JOB#920] : UP-600/700 MRS=2040 : INLINE
PROGRAMMING AREA
920-A: 1. Back-up master function.
1. Back-up master function. 920-A
Not 2
★✩
Exist 3
920-B: 1. System report and down-load job is executed in the back-
up master
1. System report and down-load job is executed
in the back-up master
920-B
Disable 0
★✩
Enable 4
920-C: 1. Automatic download to all machines in an inline system
2. PGM mode programming at the satellite machine
1. Automatic download to
all machines in an
inline system
2. PGM mode
programming at the
satellite machine
920-C
Yes
Disable 0
Enable 1
No
Disable 4
★✩
Enable 5
920-D: 1. The register is
1. The register is 920-D
Standard alone machine 0
★✩
Satellite 1
Master 2
Back up master 3
[JOB#921] : UP-600/700 MRS=0000
921-A: 1. Convert UPC-E code to UPC-A code
1. Convert UPC-E code to UPC-A code 921-A
No 0
★✩
Yes 4
921-B: 1. GLU system
1. GLU system 921-B
Centralized 0
★✩
Individual 4
921-C: 1. Bill printing method
1. Bill printing method 921-C
The item data is deleted and each bill continue to
print in the previous bill.
0
★✩
The action after printing bill the item data is not
deleted and each bill prints all item.
1
921-D: 1. Tip paid is automatically executed when tip is remained at
individual server resetting.
1. Tip paid is automatically executed when tip is
remained at individual server resetting.
921-D
Yes 0
★✩
No 4
[JOB#922] : UP-600/700 MRS=0000 : INLINE
PROGRAMMING AREA
922-A : Not used (Fixed at "0")
922-B : 1. Using new Coin Dispenser which can issue $1 Coin.
1. Using new Coin Dispenser which can issue $1
Coin.
922-B
No 0
★✩
Yes 1
922-C,D: Not used (Fixed at "00")
[JOB#923] : UP-600/700 MRS=0010 : INLINE
PROGRAMMING AREA
923-A,B: 1. The record number for REQUEST of T-LOG POLLING
(x100)
1. The record number for REQUEST
of T-LOG POLLING (x100)
923-AB
0000 ~ 9900 00-99 00 00
Ex: 923-AB=10
When the T-LOG record exceeds 1000 records, the satellite
request T-LOG polling to master.
923-C: 1. T-log function.
1. T-log function. 923-C
No 0
Yes 1
★✩
923-D: 1. Polling cycle (second)
1. Polling cycle (second) 923-D
0 ~ 9 Sec. 0 ~ 9 0 0
Ex: 923-D=5
After the master waits 5 seconds, the master starts T-LOG poll-
ing to next machine.
[JOB#924] : UP-600/700 MRS=1433 : INLINE
PROGRAMMING AREA
924-A,B,C: Not used (Fixed at "143")
924-D: Programming whether or not to lock REG-mode entries after
individual periodic total resetting
1. Locking after Daily Net resetting
2. Locking after Transaction resetting
1. Locking after Daily
Net resetting
2. Locking after
Transaction resetting
924-A
Yes
Yes 0
No 1
No
Yes 2
No 3
★✩
Note : ★
...
MRS for UP-600 /
✩
...
MRS for UP-700
To Next Page
Loading...
