To Next PageTo Next PageHow to record a signal through the rear external input jack on Sharp VCR?
If you cannot record a signal through the rear external input jack on your Sharp VCR, the VCR may not be set to external input mode. Press INPUT to set the VCR to external input mode.
General| Heads | 2 |
|---|---|
| Remote Control | Yes |
| Tuner | Yes |
| Timer Recording | Yes |
| On-Screen Display | Yes |
| Video Format | VHS |
| Recording System | NTSC |
| Playback Speed | SP, LP |
| Audio System | Mono |
| Connections | Audio output, Composite video output, RF input, RF output |
Essential safety instructions and precautions for operating the VCR.
Instructions for connecting the VCR to a TV via RF or AV terminals.
Configuring the VCR's output channel to match the TV's channel.
Guidance for connecting the VCR to cable TV systems, with and without a cable box.
Automatic setting of tuner channels and clock for initial VCR setup.
Instructions for inserting a cassette and playing back video tapes.
Step-by-step guide to recording TV programmes from antenna or cable.
Setting a simple timer to automatically record TV programmes.
Detailed procedure for setting up timed recordings for TV programmes.
Solutions for common VCR operational problems and errors.
