12
Dimensions: 257 ⳯ 182 mm
FLE (M) Sdn. Bhd.VC-A420U (10-15)
ANT/CABLE
VCR Rear (Hi-Fi model)
From
CATV
system
A
B
OUTIN
Cable Box
Cable TV Connections
Connection with cable box, A/B switch and splitter
By using an A/B switch or splitter, it is possible to switch between the cable box and the VCR output.
For example, while recording a TV program with the VCR, it is possible to watch a CATV program (including
descrambled programs) using the A/B switch.
• Connect as shown. Then go to “After the Connection”.
Splitter
(Not supplied)
Coaxial cable
(Not supplied)
Coaxial cable
(Supplied)
TV Rear
Using the A/B Switch
1. Set the A/B switch to the “A” position in the following situations.
! To watch a cable TV program while recording another program.
@ To watch a scrambled cable TV program.
# To watch a cable TV program when the VCR is turned off.
• Use the cable box to change channels.
• If you turn off the cable box, you cannot watch a CATV program.
2. Set the A/B switch to the “B” position in the following situations.
! To play back a cassette on the VCR.
@ To watch a program which is being recorded with the VCR tuner.
# To watch a program using the VCR tuner.
A/B switch
(Not supplied)
Coaxial cable
(Not supplied)
To Next Page
Loading...
