12
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO USE TO MAKE A RECORDING
Before you start!
• If appears on the VCR display, press TIMER ON/OFF to remove the symbol.
• Check that the VCR clock is displaying the correct time.
VIDEOPLUS+ allows you to program the VCR to record up to eight programmes using the
VIDEOPLUS+ numbers published in TV listings (refer to your daily newspaper or TV magazine).
1. Press the PLUSCODE button on the remote
control.
2. Enter the VIDEOPLUS+ number from the TV
listing using the
NUMBER BUTTONS.
NOTE:
3.
Press the [ / ] menu select buttons to select ONCE,
WEEKLY, DAILY.
4. If you want to make additional recordings at the same time
each day or week, then use
[/] to select the WEEKLY,
or DAILY option as appropriate.
5. Press SET to confirm.
NOTE:
The first time that you use VIDEOPLUS+ to make a
recording on each channel Preset, (PR) may be
highlighted on the On-Screen Display.
6. Enter the channel you wish to record using
the
NUMBER BUTTONS, for example if
you wish to record channel 2 press
0 2. The
VCR will remember this for the future.
See next page to continue
• An ERROR message will appear if you have entered a number that is not a current
VIDEOPLUS+ number. If this happens press
CLEAR to delete the numbers as required
and enter the correct VIDEOPLUS+ number
• Check that the menu list agrees with the times shown in the TV listing. If it does not press
CLEAR to return to the VIDEOPLUS+ menu, and re-enter the correct VIDEOPLUS+
number
→
PLUS CODE . -
ONCE WE E K L Y D A I L Y
MENU SELECT BUTTONS
Remote
Control
1/2
DATE PR START STOP
21/06 02 12:00 13:00 SP*
--/-- -- -:-- -:-- ---
--/-- -- -:-- -:-- ---
--/-- -- -:-- -:-- ---
PR : BBC2
: SELECT : CHANGE
SET : ENTER MENU : EX I T
TINS-3809UMZZ ENGLISH.book Page 12 Monday, April 3, 2000 2:03 PM
To Next Page
Loading...
