Sharp VC-MH75HM

9
www.sharp.co.uk/support
INSTALLING YOUR VCR
The clock setting screen will now appear.
To set the time and date follow the steps
below:
1.
Press the [ / ] menu select buttons
to select either 12 or 24 hour clock
operation.
2.
Press the [
/
] menu select buttons
to select TIME. Enter the time using the
NUMBER buttons or the [ / ]
menu select buttons. If the minutes or
hours are less than 10, enter the
leading 0. If using the 12 hour clock
enter AM or PM by pressing the
AM/PM
button on the remote
control.
3.
Press the [
/
] menu select buttons
to select DATE. Enter the date using the
NUMBER
buttons or the [ / ]
menu select buttons. For example, for
1st April enter
01 04
.
4.
Press the [
/
] menu select buttons
to select YEAR. Enter the last two digits
of the year using the
NUMBER
buttons or the [ / ] menu select
buttons. For example, for 2003 enter
03
. For the year 2004 enter
04
.
5.
Press the
SET
button to store the
time and date.
NOTE:
✔
All the programmes should now be correctly tuned in and the clock set.
• You will need to update the clock for Winter/Summer daylight saving.
12 hour example:
24 hour example:
CLOCK
MODE T I ME DATE YEAR
24H 15:0501/0403
MODE : 2 4H / 1 2H
 : SELECT  : CHANGE
SET : ENTER MENU : EX I T
CLOCK
MODE T I ME DATE YEAR
12H 03:05PM 01/04 03
MODE : 2 4H / 1 2H
 : SELECT  : CHANGE
SET : ENTER MENU : EX I T
AM/ PM
/
SET
Module 03G.fm Page 9 Monday, January 6, 2003 12:07 PM