Sharp VL-Z800S User Manual

87
Digital Still Camera Features
DELETE ALL? indicator
Deleting All Stored Images
You can delete all stored images on a card
in one operation.
Notes:
• Deleted images cannot be restored. Check
whether or not you want the images before
performing the procedure below.
• If you want to keep some images on the card,
first delete-protect them (see page 85), and
then perform the procedure below.
1 In Card Playback mode, press the
DISPLAY/MODE SET button until the
mode screen appears.
2 Press l or m on the Operation
button to select “DELETE ALL”, then
press the centre of the Operation
button.
• The DELETE ALL? indicator appears.
3 Press l or m to select “YES”, then
press the centre of the Operation
button.
• To cancel the setting, select “NO”.
4 Press the DISPLAY/MODE SET
button to finish the setting.
Notes:
• The protected images cannot be deleted.
Cancel the protection setting to delete the
image (see page 85).
• If a print order is assigned to delete-
protected images and you perform the
procedure above, the print order will cancel
(the protection setting will not cancel).
• It may take several seconds to delete all
images from the card.
• Do not turn the power off while deleting
images.
EXECUTE
DELETE ONE
DELETE ALL
FULL MULTI
PIC.EFFECT
1000 - 00
NORMA L
1
1
4
2
5
3
6
ALL?
NO
YES
SETSELECT
DELETE
VL-Z800S-GB-084-097 04.1.23, 8:11 AM87

Sharp VL-Z800S Specifications

General

Brand	Sharp
Model	VL-Z800S
Category	Camcorder
Language	English