PGM
MGROPX/Z
REG
X2/Z2
X1/Z1
Mode Lock
Programming A Receipt Message
9
4
4
1
2
3
Insert the manager (MA) key into the Mode Lock and turn to the PGM position.
For example to program a message.
• Ensure the Mode Lock is at PGM.
• Press followed by .
• Press (for line) followed by .
• Type in your 24 character max. message and press .
• Press (for line 2) followed by .
• Type in your 24 character max. message and press .
• Press (for line 3) followed by .
• Type in your 24 character max. message and press .
• Press at any stage to finalise.
• Return to the REG position.
Enter line
number
(1-3 as standard,
upto 6 lines optional).
24 character
message
TL/NS
TL/NS
TL/NS
TL/NS
#/TM/ST
#/TM/ST
#/TM/ST
#/TM/ST
#/TM/ST
PGM
MGROPX/Z
REG
X2/Z2
X1/Z1
Mode Lock
Reporting
10
The cash register has two reporting types. Use the reading function (X) when
you need to take a reading of sales information entered since the last reset.
This reading can be taken any number of times without clearing totals.
Use the resetting function (Z) when you need to clear the registers memory.
The reports can be taken in the X1/Z1 mode for daily sales or X2/Z2 for periodic
(monthly) reports. For further information please refer to the instruction manual.
Example Daily Reports
• Insert the manager (MA) key and turn to X1/Z1.
• To read press .
• To reset press .
• Return to REG position once the report has finished.
Common Solutions
!
1) The audit/journal take-up spool is not working. I: Please refer to Section 4 "Changing the Printing
Style - Journal Options".
2) Receipt feeding correctly but not printing. I: Ensure that you are using Thermal Paper. II: Ensure that
the paper has been installed into the printer correctly. Please see Section 3 for details.
To Previous Page
Loading...
