Sharp XL-30H

10
SOUND CONTROL
■ Volume
0 15 30
(Main unit operation)
When the VOLUME control is turned clockwise, the
volume will increase. When it is turned anti-clock-
wise, the volume will decrease.
(Remote control operation)
Press the VOLUME
button to increase the vol-
ume and the VOLUME
button to decrease the
volume.
-5 0 5
■ Bass
(Main unit operation)
1 Press the BASS/TREBLE button to select
“BASS”.
2 Turn the jog dial to adjust the bass.
(Remote control operation)
Press the BASS ( or ) button to adjust the
bass.
(Main unit)
(Remote control)
(Remote control)
(Main unit)
(Main unit operation)
1 Press the BASS/TREBLE button to select “TrE”.
2 Turn the jog dial to adjust the treble.
(Remote control operation)
Press the TREBLE (
or ) button to adjust the
treble.
(Remote control)
(Main unit)
-5 0 5
Servo Powered Volume:
● The jog dial automatically comes out when the
power is turned on, and goes back when the unit
is set to the stand-by mode.
● When the power is turned on, you can put the
jog dial in and out by pressing the VOLUME
SELECT button.
Note:
Do not push in the jog dial forcibly with your finger.
■ Treble
*XL-30H(SUK)P09-P13 00.2.3, 2:00 PM10
Downloaded from: http://www.usersmanualguide.com/