3
PRECAUTIONS
■ General
● Please ensure that the equipment is positioned
in a well ventilated area and ensure that there is
at least 10cm (4”) of free space along the sides
and back. There must also be a minimum of
20cm (8”) of free space on the top of the unit.
● Do not use oil, solvents, petrol, paint thinners or
insecticides on the unit.
● Do not expose the unit to moisture, to tempera-
tures higher than 60°C (140°F) or to extreme low
temperatures.
● Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home comput-
ers, facsimiles, etc.) which generate electrical
noise.
● Hold the AC power plug by the head when re-
moving it from the AC socket, as pulling the lead
can damage internal wires.
ACCESSORIES
Note:
Parts and equipment mentioned in this operation manual other than those in the drawing are not included.
AC power lead × 1
Remote control × 1
FM/AM loop aerial × 1
● When cleaning the heads, pinch roller, etc., re-
move the AC power plug from the wall socket as
the unit contains high voltages.
Do not remove the outer cover, as this may re-
sult in electric shock. Refer internal service to
your local SHARP service facility.
● Use the unit on a firm, level surface free from vi-
bration, and do not place anything on the top of
the unit.
● If an electrical storm is taking place near you, it
is suggested that you disconnect the AC power
lead from the AC socket for safety.
● The ventilation should not be impeded by cover-
ing the ventilation openings with items, such as
newspapers, tablecloths, curtains, etc.
● No naked flame sources, such as lighted can-
dles, should be placed on the apparatus.
● Attention should be drawn to the environmental
aspects of battery disposal.
● The apparatus is designed for use in moderate
climate.
Warning:
The voltage used must be the same as that speci-
fied on this unit. Using this product with a higher
voltage than that which is specified is dangerous
and may result in a fire or other type of accident
causing damage.
SHARP will not be held responsible for any dam-
age resulting from use of this unit with a voltage
other than that which is specified.
**XL-30H(SUK)P01-P08 00.2.2, 3:53 PM3
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
