Sharp XL-30H Operation Manual

16
(Continued)
(Main unit operation)
1 Press the VOLUME/JOG button.
● The preset channel number will flash.
2 Whilst the preset channel number is flashing,
turn the jog dial to select the desired station.
(Remote control operation)
Press the PRESET (
or ) button for less than
0.5 seconds to select the desired station.
● The stations (preset channel number, frequency
and frequency band) which have been stored in
memory will appear in the display in numerical
order, irrespective of the frequency bands.
Note:
When searching for a memorised station, do not
press the PRESET button for more than 0.5 sec-
onds.
When the PRESET button is pressed for more than
0.5 seconds, the unit will enter the preset memory
scan mode.
To recall a memorised station:
1
2
( )
PRESET
To clear a memorised station:
4
3
1
2
1 Press the VOLUME/JOG button.
2 Turn the jog dial to select the preset channel
number you want to erase.
3 Press the MEMORY/SET button.
4 Within 5 seconds, press the TUN CLEAR button.
1,2
1 To scan the preset stations, press the PRESET
( or ) button for more than 0.5 seconds.
● The station preset number flashes and pro-
grammed stations are sequentially received for
5 seconds each.
2 Press the PRESET (
or ) button again to
stop the memory scan at the desired station.
Note:
When the preset memory does not have any sta-
tions stored in it, the preset memory scan will not
function.
Backup function:
The backup function protects all station presets for
a few hours should there be a power failure or the
AC power lead is removed from the AC socket.
■ Preset memory scan
The stations saved in the preset memory can be
scanned automatically.
*XL-30H(SUK)P14-P18 00.2.2, 3:57 PM16
Downloaded from: http://www.usersmanualguide.com/

Sharp XL-30H Specifications

General

Brand	Sharp
Model	XL-30H
Category	Stereo System
Language	English