02/11/22 XL_35W_SCA_3.fm
19
XL-35W
Tape Playback
Listening to a cassette tape
Before playback:
!
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
!
Do not use C-120 tapes or poor-quality tapes, as they
may cause malfunctions.
!
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "TAPE" appears on the
display.
When operating with the remote control, press the TAPE but-
ton.
3
Open the cassette compartment by pushing the area
marked "PUSH EJECT ".
4
Load a cassette into the cassette
compartment with the side to be
played facing toward you.
5
Close the cassette compartment by pushing the area
marked "PUSH EJECT ".
6
Press the button to start playback.
When playback is performed using the remote control, press
the button.
To Next Page
Loading...
