Sharp XL-B710 User Manual

8
3. Press the PROG button to store the station.
4. Repeat above steps 1 to 3 for each station you want to store in
memory with a preset number.
Show RDS information
RDS (Radio Data System) is a service that allows FM stations to show
additional information. If you tune to a RDS station, the station name
are displayed. When automatic programming is used, RDS stations are
programmed  rst.
1. Tune to a RDS station.
2. Press the INFO button repeatedly to scroll through the following
information (if available): Station name, PTY, RADIO TEXT, Frequency,
CLOCK INFO.
Troubleshooting
No Power
Reason
• Power cable not connected to wall socket
• Power socket is not switched on
Solution
• Make sure the plug is connected
• Switch the power on
No Sound CD/AUX/RADIO
No Sound from AUX input
Reason
• Volume is too low
• AUX source volume is too low
Solution
• Increase the volume
• Increase the output volume of the AUX source
Sound is distorted
Sound is distorted from AUX Input
Reason
• Volume is too high
• AUX source volume is too high
Solution
• Reduce the volume
• Reduce the output volume of the AUX source
Unable to play CD
Reason
• No disc in the tray
• Disc not loaded properly
• Disc is dirty
Solution
• Insert a compatible disc
• Check the disc loaded
• Clean the disc
Static Sound
Reason
• Poor reception
Solution
• Re-locate the antenna (FM)
Desired station not found
Reason
• Weak signal
• Station not available in your area
Solution
• Use the manual tune function
Clock settings erased
Reason
• Power has been interrupted or the power cord has been disconnected.
Solution
• Reset the clock.
Unit cannot synchronise the RDS station's time and date
Reason
• The station does not transmit the time and date information.
Solution
• Setting the time synchronisation to "Radio"- see point set the clock.
I can't  nd the Bluetooth name of this unit on my Bluetooth device
Reason
• Bluetooth function is deactivated on your device
Solution
• Ensure the Bluetooth function is activated on your Bluetooth device.
• Re-pair the unit with your Bluetooth device.
Technical speci cation
Model XL-B710
Radio Signal 87.5-108MHz
Power Supply AC 220-240V ~ 50Hz
Power Consumption 30 W
Standby power consumption <1W
Output Power 2 x 15 W (RMS)
Frequency Response 60Hz - 20KHz
Bluetooth
Version V 4.2
Maximum power transmitted <20 dbm
Frequency bands 2402 MHz ~ 2480 MHz
CD player
Disc format CD, CD-R, CD-RW, MP3
Remote Control
Battery Type CR2025
110 mm
2,8 kg

Sharp XL-B710 Specifications

General

Brand	Sharp
Model	XL-B710
Category	Stereo System
Language	English