This Quick Start Guide will help you to correctly install and oper-
ate your system.
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
0301
1
Accessories
2
Remote control battery installation
1 Remove the battery cover.
2 Insert the batteries as shown.
3 Replace the cover.
Remote control × 1
AM loop aerial × 1
FM aerial × 1
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
TINSEA008AWZZ
03M R YT 2
3
System connections
Wall socket
(AC 230 - 240 V, 50 Hz)
Left speaker
FM aerial
Black
Red
AM loop aerial
Right speaker
4
Turning on your system
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
1 Press the X-BASS/DEMO button to
cancel the demonstration mode.
2 Press the ON/STAND-BY button to
turn the power on.
MODEL
XL-HP404E
MICRO COMPONENT SYSTEM
XLHP404E_QG.pm 03.12.4, 4:23 PM1
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Need help?
General
