Using the Auto Station Programme Memory
(ASPM)
Whilst in the ASPM operation mode, the tuner will automatically
search for new RDS stations. Up to 40 stations can be stored.
If you have already stored some stations in memory, the number of
new stations you can store will be less.
ASPM
PTY.TI
SEARCH
DISPLAY
MODE
/
ASPM
1
Press the TUNER (BAND) button to select the FM band.
2
Press and hold down the ASPM button for at least 3 sec-
onds.
1 After "ASPM" has flashed for about 4 seconds, scanning will
start (87.50 - 108.00 MHz).
2 When an RDS station is found, "RDS" will appear for a short
time and the station will be stored in memory.
3 After scanning, the number of stations stored in memory will
be displayed for 4 seconds, and then "END" will appear for
4 seconds.
To Next Page
Loading...
Need help?
General
