EN – 14
BEFORE OPERATION
• Plug in the oven. The oven display will display: “0:00”, an audible signal will sound once.
• This model has a clock function and the oven uses less than 1.0 W in stand by mode. To set the clock, see below.
SETTING THE CLOCK
Your oven has a 24 hour clock mode.
1. Press the CLOCK SET key
once and “00:00” will ash.
2. Press the time keys and enter the current time. Enter the hours by pressing the 10 min key and enter the minutes
by pressing the 1 min and 10 s keys.
3. Press the CLOCK SET key
to nish clock setting.
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not been
set, the display will only show “0:00” when cooking is complete.
• To check the time of day during a cooking process, press CLOCK SET key and the LED will display the time of day for
2-3 seconds. This does not a ect the cooking process.
• While in the clock setting mode, if the STOP key is pressed or if there is no operation within 1 minute, the oven will
go back to the former setting.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show “0:00” after
the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be
erased.
To Next Page
Loading...
Need help?
General
