Sharper Image 204941 - Setting and Using the Alarm

8 9
Setting and Using the Alarm:
For your convenience, two separate alarms may be set to accomodate individual
wake up times. This feature allows each individual to wake to separate sounds as
well as fall asleep to one sound and wake up to another sound.
• al1=“Alarm1”
• al2=“Alarm2”
To set alarm:
1. Press the button for the alarm you want to set to toggle through alarm modes
- BEEP, SOUND, and OFF. The bell icon will appear next to the selected mode
when alarm is set.
2. Press and HOLD the button for the alarm you want to set. The time will begin
ashingforhour(HH).Usethe"+"and"-"buttonstosetthewakeuphour
desired.
3. Pressthebuttonagainforthealarmyouwanttosetandthetimewillbegin
ashingforminute(MM).Usethe"+"and"-"buttonstosetthewakeup
minute desired.
4. Press the button again for the alarm you want to set. If the alarm is set for
SOUND mode, you can toggle through the sounds and set sound for wake
up. If the alarm is set for BEEP mode, this will exit you out of Alarm Set mode.
5. Toturnoffthealarm,pressthebuttonforthealarmyouwanttoturnoffuntil
the Alarm icon disappears from the display.
6. Whenthealarmsounds,eitherpresstheSNOOZE/TIMERbuttontoactivate
snooze for nine minutes or press POWER button to turn alarm off.
Timer:
When the power is on and you are listening to a nature sound, you may set a
timer so the unit will automatically turn off.
1. TogglethroughtheSNOOZE/TIMERbuttonuntilyoundthetimeofyour
choice,15,30,45or60minutes.
2. Tocancelthetimer,togglethroughtheSNOOZE/TIMERbuttonuntilthe
LEDlightsays“OFF”orpressPOWER.
(Refer to Fig.2)