32
Tilt top of Drive Ram away from tractor/skid loader
push middle lever away from the operator.
Tilt top of Drive Ram toward tractor/skid loader pull
middle lever toward the operator.
8.
Pull up Safety Latch and pull back Main
Hydraulic Control Lever to raise Drive Ram.
Drive Ram, Hydraulic Control Valve Lever, & Safety Lever.
9.
Hold up Safety Latch and push Main Hydraulic
Control Lever to release the Drive Ram and
create impact with post. Continue this
process, as needed, to drive the post to the
desired depth.
Drive Ram, Hydraulic Control Valve Lever, & Safety Lever.
To Next Page
