AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page
12
OPERATION
Before First Use
After unpacking, ensure that the contents are complete and check for any transit
damage in order to avoid any danger. Do not use it if in any doubt, but contact our
customer service team.
In order to protect against damage during transit, your appliance is packaged.
• Remove the appliance carefully from its sales packaging.
• Remove all packaging elements.
• Keep all packaging away from Children. Danger of suffocation.
• Clean the appliance and all accessories to remove all packaging dust according to the
instructions in the chapter “CLEANING AND MAINTENANCE".
Operation of the appliance
Before each use of the appliance, ensure that all ventilation slots, gratings and filters
are free of dirt and that they are not blocked. If required, clean the appliance and the
accessories according to the “CLEANING AND MAINTENANCE” chapter.
Connect the appliance mains plug to the electrical socket.
To switch on, press the On/Off switch.
The power-on lamp shows that the device is operating.
To switch off the device, press the On/Off switch.
After machine turns on, the default is cooling mode with 22℃ and low fan speed.
Press “MODE” to select cooling mode, cooling mode indictor turns on.
Press “UP” or “DOWN” to adjust temperature (from 16℃ to 31℃).
Press “FAN” to select high or low fan speed.
Press “MODE” to select fan mode, the fan mode indicator turns on.
Press “FAN” to select high speed or low speed.
Temperature and sleep function cannot be setup in fan mode.
Under standby mode, press “TIMER” to set up the power-on time. Timer indicator
Under power-on mode, press “TIMER” to set up power-off timer. Timer indicator
To Next Page
Loading...