AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page
15
CLEANING and MAINTENANCE
This appliance requires little maintenance. It contains no user-serviceable parts. Any
servicing requiring disassembly other than cleaning must be performed by a qualified
appliance repair technician.
Before Cleaning
Before unplugging unit ensure all controls are set to off.
When not in use or before cleaning, always disconnect the appliance from the
mains supply.
Care and Cleaning
Accumulated dust may be removed from appliance surface with a dry soft cloth.
For more thorough cleaning, use a cloth that is slightly moist with a solution of
mild detergent and water.
Never use rough scouring pads or abrasive cleansers on any plastic or metal parts
as the surface may be damaged.
Dry the appliance casing thoroughly with a soft, dry cloth before operating the
Clean the filters every two weeks, if filters are blocked by dust, machine efficiency
1. Clean the upper filter screen frame
2. Clasp the wedging block of the EVA filter screen frame with hands. Force
down from the outside to remove the EVA filter screen frame. Unscrew four
screws fixing the EVA filter screen and the rear housing to remove the EVA
filter screen.
3. Put the EVA filter screen into warm water with neutral detergent (about 40℃
/ 104℉) and dry it in the shade after rinsing clean.
4. Insert filter back into the unit once it is thoroughly dry.
To Next Page
Loading...