AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page
14
Notes:
Keep the drainage cover and the water plug secure, do not lose.
During drainage, the body can be tilted slightly backwards.
If the water container cannot hold all the water, before the water container is full,
close the water outlet with the water plug as soon as possible to prevent water
from flowing to the floor or the carpet.
1. When the water is drained, close the water plug, and tighten the drainage cover.
2. Restart the machine after the water plug and drainage cover are installed,
otherwise condensation in the machine will flow to the floor or the carpet.
Continuous drainage (Optional)
(Only applicable to cooling and dehumidifying mode), as shown in figure:
1. Unscrew the drainage cover, and unplug the water plug.
2. Set the drainage pipe into the water outlet.
3. Connect the drainage pipe to the bucket.
To Next Page
Loading...