• Before each trip, Check frame for any damage.
- Look for any dents, cracks or chips to the frame. Although some may only be cosmetic, a small
crack in the frame can be a serious safety hazard. DO NOT ride the bike if you identify any
cracks in the frame.
• Check for loose spokes.
- Squeeze the spokes together to check the spoke tension. Spokes should flex slightly and return
to their original position. See your local bike shop for wheel truing and spoke replacements if
necessary. Tighten any loose spokes with a spoke wrench.
• Check forks for damage and air pressure (if applicable).
Storage, maintenance and cleaning
• Never use alcohol, benzine, acetone or other caustic and volatile chemical solvents that are
corrosive to surfaces. These substances can damage the e-bike appearance and its exterior
or interior structure.
• Never clean the e-bike with a strong stream of water or high-pressure cleaner.
• Make sure that the e-bike is switched off and the charging socket cover is closed before
cleaning, otherwise you may be exposed to the risk of electric shock or damage the e-bike.
24
Shell
RIDE
To Next Page
Loading...
General