8 Shelly GAS User guide 9
Forgotten Password
In case you forget or lose your password, just enter the
e-mail address you have used in your registration. You will
then receive instructions on how to change your pass-
word.
WARNING! Be careful when you type your e-mail address
during the registration, as it will be used in case you forgot
your password.
After registering, create your rst room (or rooms), where
you are going to add and use your Shelly devices. Shelly
Cloud allows easy control and monitoring using a mobile
phone, tablet or PC.
Device Inclusion
To add a new Shelly device, connect it to the power grid
following the Installation Instructions included with the
Device.
Step 1
Place your Shelly into the power socket, in the room where
you want to use it. The WiFi LED should be blinking, once
per second.
WARNING: If the WiFi LED is not blinking once per second,
press and hold the reset button for at least 10 seconds.
The WiFi LED should be blinking, once per second. If not,
please repeat or contact our customer support at: sup-
port@shelly.cloud
Step 2
Choose “Add Device”.
In order to add more devices later, use the Menu at the
top right corner of the main screen and click “Add Device”.
Type the name and password for the WiFi network, to
which you want to add Shelly.
Step 3
If using iOS: you will see the following screen(left):
On your iOS device open Settings > WiFi and connect to the
WiFi network created by Shelly, e.g. ShellySmoke-35FA58.
If using Android: your phone will automatically scan(right)
and include all new Shelly devices in the WiFi network, that
you dened.
To Next Page
Loading...