18 Shelly GAS User guide 19
Volume
Dene the alarm volume level of the device, when the
alarm is triggered. Possible range: 1 ~ 11.
Firmware Upgrade
Shows present rmware version. If a newer version is
available, you can update your Shelly by clicking Upload
to install it.
Factory reset
Return Shelly to its factory settings.
Device Reboot
Reboots the device.
Device Info
Shows your device ID. In Client Mode shows also your WiFi
network name and WiFi signal strength.
Additional Features
Shelly allows control via HTTP from any other device,
home automation controller, mobile app or server.
For more information about the REST control protocol,
please visit www.shelly.cloud or send a request to devel-
opers@shelly.cloud.
To Next Page
Loading...