16 Shelly GAS User guide 17
Step 3
Type 192.168.33.1 into the address eld of your browser
to load the web interface of Shelly.
General - Home Page
This is the home page of the embedded web interface.
• Current alarm status
• Current PPM* count
• Connection to Cloud
• Present time
• Settings
* PPM - intensity of combustible gas in the area
Self test
Make a self-test of the device.
Mute
Mute the device, when the alarm is on. You can not mute
the device, if the alarm is not triggered.
Internet/Security
WiFi Mode - Client
Allows the device to connect to an available WiFi network. Af-
ter typing the details in the respective elds, press Connect.
WiFi Client Backup
Allows the device to connect to an available WiFi network,
as a secondary (backup), if your primary WiFi network be-
comes unavailable. After typing the details in the respec-
tive elds, press Set.
WiFi Mode - Acess Point
Congure Shelly to create a Wi-Fi Access point. After typ-
ing the details in the respective elds, press Create Ac-
cess Point.
Restrict Login
Restrict the web interface of Shely with a Username and
Password. After typing the details in the respective elds,
press Restrict Shelly.
SNTP Server
You can change the default SNTP server. Enter the ad-
dress, and click Save.
Advanced - Developer Settings
Here you can change the action execution:
• Via CoAP (CoIOT)
• Via MQTT
Cloud
You can Activate/Deactivate the connection to Shelly
Cloud.
ATTENTION! To reset the device, press and hold the But-
ton for at least 10 seconds. Upon successful factory reset,
Shelly will make a lond sound.
Settings
Time Zone and Geo-location
Enable or Disable the automatic detection of Time Zone
and Geo-location. If Disabled you can dene it manually.
To Next Page
Loading...