Shenchen Pump LabV Series
8. Function and Features
4.3 inch color touch screen control, animation shows working state, the flow
volume and motor speed are displayed in the same screen.
Intelligent calibration function, it can calibrate the flow rate and dispensing
volume, ensure the flow accuracy, suitable for high accuracy transferring
liquid.
On-line micro adjusting function, it can adjust the flow rate during production
progress, to avoid the filling errors because of tubing fatigue and elasticity
decreased.
Accurate angle control technology, reach high precision dispensing and
measurement.
Fixed volume measurement function: After turn on this function, the peristaltic
pump will measure the liquid volume automatically, it will stop automatically
after the volume reaches the set value. During this process, the flow rate can
be changed. It is suitable for liquid metering in the laboratory or quantitative
feeding in the chemical reaction process, etc.
Fixed time and volume function: After turn on this function, the peristaltic
pump will transfer fixed volume within set time. It is suitable for liquid
dispensing in laboratory and industrial production.
Timer start and stop function: Pump starts and stops time can be set any time
to realize automation control.
Power down memory function, store the running parameters in time, safe and
reliable.
Fast fluid-filled function, can wash the tubing and also fill fluid in the tubing.
High torque and low power loss, it can load several pump heads or
multichannel pump head, meet different application requests.
External control start and stop, convenient for equipment supporting.
To Next Page
Loading...