Shenchen Pump LabV Series
E——External Control Port F——Built-in fuse
3. Keyboard Instruction
Stop Button: Press stop button, pump stops working. Forbidden buttons in the
main interface can be used. Keep pressing the button and turn on the pump
power supply, that will initialize the pump and all the parameters will be lost.
Full Button: At stopping state or transferring state, press this button, the pump
will run with the highest speed. This button can be used for washing tube or
fast filling liquid.
CW/CCW Button: Press this button once, the motor will change running
direction once. When the fixed volume measurement or dispensing are on, this
button does not work.
Start Button: Press this button, the motor starts running. When fixed volume
measurement or dispensing function are on, press this button, the pump will
start work with the function. Under the operation of fixed volume
measurement, clicking this button again will pause current operation.
To Next Page
Loading...