Shenchen Pump LabV Series
10. Maintenance
Check the running status of machine before starting it, normal operation can
be put into use.
Check for leakage, and correct fault which can be appeared.
Clean liquid overflowed from the pump in time.
Please turn off the power supply and unplug the power socket (Hold the socket
instead of power cord) when liquid splashed on pump. Check whether liquid
flows into the machine, if it does, please contact the manufacture.
The foot pedal switch and other external control plugs must be connected or
disconnected in the power-off status to prevent the external control interface
from being burned.
The user’s power socket must have ground wire, and have reliable grounding.
This product has no waterproof measures. Please take protective measures
when using in water environment.
This product does not have special certification such as medical certification.
When it needs to be used in special fields such as medical and military, please
self-certify.
If the pump does not use for a long time, please clean it and keep it in dry and
ventilated environment.
The company shall not bear the direct and indirect losses caused by the
malfunction or improper operation of this product.
To Next Page
Loading...