Need help?Do you have a question about the Sherbourn 5-200 and is the answer not in the manual?
Precautions for grounding or polarization to prevent defeat.
Warning to reduce risk of fire or electric shock.
Caution for preventing electric shock by matching plug to slot.
Describes the ON/OFF control and standby mode illumination.
Explains the LED status indicators for amplifier operation.
Selector for RCA (Unbalanced) or XLR (Balanced) audio inputs.
Steps to diagnose and resolve no sound issues.
Solutions for amplifier shutdown or circuit breaker tripping.
Steps to identify and resolve ground loop hum issues.
General| Channels | 5 |
|---|---|
| Type | Power Amplifier |
| Power Output (per channel) | 200W |
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 47k ohms |
| Dimensions | 17" W x 5.25" H x 15" D |
| Weight | 45 lbs |
| Input Sensitivity | 1.2V |
| Damping Factor | >500 |
| Signal-to-Noise Ratio | 110dB |
To Next Page
