SHERCO 2014 250 SE/R User Manual

Record vehicle and engine serial numbers for identification and future reference.

Identification of key components located on the right side of the motorcycle.

Identification of key components located on the left side of the motorcycle.

Overview and identification of various controls on the handlebars and dashboard.

Details on where to find the vehicle and engine serial numbers on the motorcycle.

Description and adjustment of the clutch lever on the left handlebar.

Description and adjustment of the front brake lever on the right handlebar.

Details on the functions of the switches located on the left handlebar.

Explanation of the on/off positions for the motorcycle's lights.

Details on the functions of the switches located on the right handlebar.

Overview of the dashboard display and its associated buttons.

Explanation of the two positions of the main key switch.

How to operate the left, right, and off positions of the flasher switch.

Details on the two possible positions for the engine on/off switch.

Operation and precautions for using the motor emergency stop button.

Explanation of the two positions for the injection system mapping switch.

Guide to operating the motorcycle's onboard computer and its various functions.

Details on accessing and configuring the motorcycle computer's setup menu.

Instructions for opening and closing the fuel tank and operating the fuel tap.

Explanation of the choke lever's function and activation for starting the engine.

Explanation of the gear selector path for all six speeds.

Identification of the rear brake control pedal.

Instructions for deploying and using the side stand, including its security system.

Step-by-step guide for starting the motorcycle's engine when cold.

Instructions for starting the motorcycle's engine when it is already warm.

Guidance on proper gear shifting, including finding neutral.

Steps for safely parking the motorcycle after use.

Procedure for filling and servicing the motorcycle's cooling system.

Step-by-step instructions for safely draining the coolant from the system.

Procedure for refilling the cooling system with the correct coolant.

How to check the free play in the throttle cable for proper function.

Procedure for adjusting the throttle cable play using the adjuster screw.

Instructions for adjusting the main valves cable for optimal performance.

Procedure for adjusting the engine's idle speed and idle mixture.

Steps to check and top up the engine oil level correctly.

Procedure for draining the used gearbox oil safely.

Instructions for refilling the gearbox with the correct type and amount of oil.

Procedure for draining the float chamber of the carburetor.

Guide to adjusting the handlebar position for rider comfort and control.

How to adjust the steering angle using set screws for desired handling.

Guidance on adjusting chassis settings based on rider weight.

Procedure for adjusting the front fork's compression damping.

How to adjust the front fork's rebound damping for optimal suspension response.

Procedure for adjusting the preload on the front fork springs.

How to adjust the low-speed compression damping of the rear shock absorber.

How to adjust the high-speed compression damping of the rear shock absorber.

Procedure for adjusting the rebound damping on the rear shock absorber.

How to measure static deflection of the rear shock without rider load.

How to measure and adjust sag on the rear shock absorber with rider load.

Procedure for adjusting the preload on the rear shock absorber.

Instructions for selecting and changing the rear shock absorber spring.

Step-by-step guide to removing the motorcycle seat.

Procedure for correctly reinstalling the motorcycle seat.

Instructions for removing the air filter for maintenance or replacement.

Procedure for cleaning the foam air filter using specific cleaners and oils.

Steps for correctly reinstalling the air filter and its support.

Detailed instructions for safely removing the motorcycle's fuel tank.

Procedure for correctly reinstalling the fuel tank and connecting lines.

How to remove accumulated air pressure from the front forks.

Procedure for cleaning and lubricating fork dust seals.

How to check for play or resistance in the steering head bearings.

Procedure for adjusting the play in the steering head bearings.

Instructions for cleaning the drive chain to increase its service life.

How to check and measure the correct tension of the drive chain.

Procedure for adjusting the drive chain tension for proper operation.

How to adjust the position of the clutch and brake levers for rider preference.

Procedure for checking the clutch fluid level in the master cylinder.

Instructions for removing the engine protector for maintenance access.

Step-by-step guide to safely remove the rear shock absorber.

Procedure for correctly reinstalling the rear shock absorber.

Instructions for safely removing the front wheel from the motorcycle.

Procedure for correctly reinstalling the front wheel onto the motorcycle.

Step-by-step guide to safely remove the rear wheel from the motorcycle.

Procedure for correctly reinstalling the rear wheel onto the motorcycle.

How to check and maintain correct tire pressure for safe riding.

Guide to inspecting tires for wear, cuts, cracks, and bulges.

How to check the tension of the wheel spokes for stability.

How to check the free play in the front brake lever.

Procedure for adjusting the front brake lever's free play.

How to check the front brake fluid level in the reservoir.

Procedure for refilling the front brake fluid reservoir.

How to adjust the position of the rear brake pedal.

How to check the travel of the rear brake pedal.

Procedure for adjusting the travel of the rear brake pedal.

How to check the rear brake fluid level in the reservoir.

Procedure for refilling the rear brake fluid reservoir.

Instructions for removing and replacing front and rear brake pads.

How to inspect brake pads for wear and determine if replacement is needed.

Procedure for correctly reinstalling brake pads after inspection or replacement.

Step-by-step instructions for safely removing the motorcycle battery.

Procedure for correctly reinstalling the motorcycle battery.

Instructions for charging the motorcycle battery using a charger.

Procedure for replacing the main fuse in the fuse box.

Instructions for replacing the fuse for the motorcycle's lights.

Step-by-step guide to remove the headlight housing for access.

Procedure for correctly reinstalling the headlight housing.

Instructions for replacing the headlight bulb and pilot lamp.

How to adjust the headlight beam for proper illumination.

Procedure for replacing the battery in the motorcycle's computer unit.

Recommended procedures for washing the motorcycle to maintain its condition.

Instructions for long-term storage of the motorcycle to prevent damage.

Steps to take to prepare the motorcycle after a period of storage.

List of major maintenance tasks recommended to be performed by a Sherco dealer annually.

List of checks and maintenance tasks the rider should perform regularly.

Key maintenance checks and tasks recommended for dealer servicing at specific hour intervals.

Specifications for tightening torques of various engine components.

Specifications for tightening torques of various chassis components.