Need help?Do you have a question about the SHERCO X-RIDE 2.9 and is the answer not in the manual?
General| Displacement | 272.2 cc |
|---|---|
| Transmission | 6-speed |
| Cooling System | Liquid-cooled |
| Front Brake | Disc |
| Rear Brake | Hydraulic disc Ø 220 mm |
| Clutch | Wet multi-disc |
| Frame | Steel |
| Fuel System | Carburetor |
Fields for recording chassis, engine, and key numbers for vehicle identification.
Guidelines for initial operation and understanding cautionary symbols (ATTENTION, WARNING, TIP).
Details on finding the chassis number on the steering head tube.
Details on finding the engine number on the crankcase.
Procedure for checking and adding front brake fluid, including fluid type and level.
Steps for removing air from the front brake hydraulic system to ensure proper function.
Procedure for checking and adding rear brake fluid, including fluid type and level.
Steps for removing air from the rear brake hydraulic system to ensure proper function.
How to adjust the tension and free play of the front brake lever.
Procedure for adjusting the clutch lever tension and free play.
How to adjust the position of the rear brake pedal for rider comfort and control.
Steps for adjusting the throttle cable play for proper operation and safety.
How to adjust the compression damping on the left front fork leg.
How to adjust the extension damping on the right front fork leg.
Procedure for releasing pressure build-up in the front fork legs for optimal performance.
How to adjust spring preload and hydraulic compression/extension of the rear shock absorber.
Guidelines for inspecting brake disc thickness for wear and damage.
Procedure for inspecting brake pad thickness for wear and potential damage.
Instructions for checking and filling the motorcycle's cooling system.
How to check and adjust tyre air pressure and minimum tread depth.
Ensuring cleanliness and lubrication of various springs for proper operation.
Step-by-step guide for removing and reinstalling the motorcycle's front wheel.
Procedure for safely removing and reinstalling the motorcycle's rear wheel.
Procedure for adjusting chain slack and ensuring correct wheel alignment.
How to adjust carburettor settings for idling speed and air-fuel mixture.
Interpreting spark plug condition to diagnose carburetion issues.
Procedure for accessing, cleaning, and refitting the air filter.
How to check the engine oil level and add oil if necessary.
Steps for draining old engine oil and preparing for refilling.
Detailed specifications for engine, chassis, suspension, wheels, and other components.
To Next Page
