Need help?Do you have a question about the SHERCO 300 SE-R and is the answer not in the manual?
Detailed specifications for the engine, including type, capacity, and ignition, and for the motorcycle's cycle parts like frame and suspension.
Fork and shock absorber adjustment settings for factory and racing configurations, covering compression, rebound, and spring stiffness.
Table of tightening torques and carburetor adjustment data for SE 250 models, based on altitude and temperature.
Checks for load circuit, sensors, voltage regulator, and includes wiring diagrams for main, lights, and accessories harnesses.
Step-by-step guide for removing and reinstalling the engine, including safety warnings and torque values.
Initial steps for dismantling the engine, including gearbox drainage, and procedures for checking engine components.
Steps for reassembling the engine, starting with the half crankcases and gearbox lubrication tube.
Overview of the Synerject system and the process for installing the diagnostic software and hardware.
Setting up the diagnostic software, including language, communication parameters, and general navigation.
Reading, interpreting, and erasing default codes, testing actuators, and updating the ECU.
Steps after ECU updates, including bike startup verification, reconnection of keyless mode, and using screen printing for support.
General| Transmission | 6-speed |
|---|---|
| Dry Weight | 105 kg |
| Seat Height | 950 mm |
| Displacement | 293.1 cc |
| Bore x Stroke | 72 mm x 72 mm |
| Clutch | Wet multi-disc |
| Frame | Chrome-molybdenum steel semi-perimeter |
| Front Brake | Single disc |
| Rear Brake | 220 mm disc |
To Next Page